ESB / eircom poles ➕ steel shed ➕ concrete pipes

**PRICES at very end** ESB / eircom poles – already cut. + some 4ft stakes + concrete pipes + metal shed + extendable slatted shed galvanise divider gate with drinking bowl Poles are all 7 foot long (bar one short one). Diameter varies between 6.5 inches (the 4) and 8.5-9.5 inches (the 3) Great fence strainer posts / gate posts etc. Also have all the round 4ft stakes pictured in the transport box. Some of them might be 5 foot. About 20 of them. Concrete pipes (as pictured, there is 32 of them) Shed – 8'6 x 5'4 x 7' (a little less on one side give roof slope). Has timber boards for floor and has a few coat hooks to rear. Also has welds for a shelf. This isn't a flimsy garden shed, it was custom made. Frame and bracing is fairly heavy duty. Dry. Cladding, so no need to paint. Could be used as tool / bicycle shed. Would fit a few bikes. It had many uses over the years, lately we were using it for childrens outdoor toys but are now using one of the farm sheds for those hence sale. Buyer would need to load etc. Galvanise divider gate: "4 Bar Drinker Back Panel", with drinking bowl. Was only up a few months before cattle were sold. Measures well over 13ft. See picture, and that’s not it fully extended. Seriously robust gate with spring loaded latches. Pretty sure it came from Teemore Engineering (as ours has same green handle latches — https://www.teemoreengineering.com/products/4-bar-spring-gate-end/ — see drinker bowl type, drinker bowl is on hinge end). Prices –€25 for the smallest ESB pole –€30 each for the next 3 –€40 each for the next 3 – €tbc for the stakes once I look at them properly (Edit: probably keep them but will leave them up for now) – €150 for the all the pipes (not selling individually) – €590 for the shed – €500 for divider gate and drinker (unlikely to split, prefer to sell together)