Charnwood PT200 8'' x 5'' Bench Planer Thicknesser

A compact and portable planer thicknesser. 8'' Planing Capacity 8'' x 5'' Thicknessing Capacity Aluminium Tables To Minimise Weight Extruded Guide Fence For Accuracy Tilting Fence With Twin Guides Rubber Coated Feed Rollers 100mm Diameter Chip Extraction Outlet Light enough to move off the bench when not in use and yet tough enough to produce 8" x 5" timber into flat and dimensioned pieces. The planing beds are precision ground aluminium and the guide fence is a rigid aluminium extrusion which can be tilted and locked at any angle up to 45 degrees when required. The steel thicknessing bed has an extension arm on the outfeed side and is supported in each corner by chain driven adjusting screws. Once the height is set, rubber coated feed rollers pass the timber through the high speed cutter block leaving a beautiful finish with no roller marks. The redesigned dust hood now has a quick action clamp to allow faster removal when changing between Planing and thicknessing modes. The hood fits onto the thicknessing bed during planing operations and is then moved over the top when thicknessing. As a safety feature a location sensor detects that the dust hood has been correctly fitted before allowing the motor to run. Supplied with re-grindable knives, 100mm diameter dust extraction outlet, blade setting tool, 4 adjustable rubber feet, 2.0m power cable and UK 3 pin plug. PT200 Specification Surfacing width 204mm (8") Length of surfacing tables 740mm Maximum planing depth of cut 2mm Fence tilt 90 - 45 Table height 360mm Thicknessing capacity 5 - 125mm (1/4" - 5") Length of thicknessing table 270mm Feed speed 8m/min Maximum depth of cut 2mm Cutterblock speed 9000rpm Number of knives 2 Motor (carbon brush) 1500w (2hp), 240v Dimensions (WxDxH) 830mm x 400mm x 460mm Weight 28kg Assembly Time Required 5 Minutes Rating Hobby Warranty 1 Year Visit our Store: Mallow Tools Ballinamona Shanballymore Mallow Co. Cork P51 HX06 Tel: 022-40656 Website: www.mallowtools.ie