Charnwood Cast Iron Router Table (1/4'' & 1/2'')

A heavy weight router table with a solid one piece cast iron top. The rigid steel floorstand provides a comfortable working height for handling large panels. The table top is hinged to the floorstand and can be raised up, making the router more accessible when adjustments are needed. The table aperture is 100mm diameter with insert rings provided to reduce this size when using smaller diameter cutters. Our large router table fence allows work pieces to be securely held during the cut with the aid of 2 fence mounted feather boards, to hold the work down against the table, and the front feather board to hold the work up against the fence. Using this method edge mouldings can safely be cut onto small pieces such as beading or picture frames. Our unique new centralising jig allows you to set your router accurately and quickly into the table. It then holds the router in place whilst you lock the clamps underneath the table. The clamps themselves have been redesigned to allow fast removal of the router, ideal for users who want to regularly remove and refit the router. For the odd job where the whole face of the timber is being removed, a set of shims are supplied that can be added to the outfeed fence to step it out and provide support to the work piece. The cast metal mitre fence runs in a T-slot and is particularly accurate on this model. The mitre guide swings from 90 to 30 degrees each way with locater stops at 45 degrees and a further stop at 90 degrees for accurate end grain work. The clamping system, used to attach the router to the table, is universal allowing any sized router from any manufacturer to be used. Supplied with 4 rubber feet, mitre guide and 68mm extraction outlet. Specification: Table Size: 680mm x 510mm Table Height: 860mm Cutter Aperture: 30mm, 60mm & 100mm Mitre Guide T-Slot: (W x D) 19mm/ 26mm x 9.5mm Dimensions (860 x 620 x 1220mm) Weight: 75kg 12 Months Guarantee! Same Day Dispatch Throughout Ireland For €29.95!