Yamaha A-S2200

Warranty until 2031, the amplifier is practically new It comes with the original box and all the documentation.Less than 50 hours of use. Rated output power (20 Hz to 20 kHz, total harmonic distortion (THD) 0.07% on two channels) 90 W + 90 W at 8 Ω 150 W + 150 W at 4 Ω Dynamic power 105 W + 105 W at 8 Ω 135 W + 135 W at 6 Ω 190 W + 190 W at 4 Ω 220 W + 220 W at 2 Ω Audio Performance Bandwidth (THD 0.1%, 45 W): 10 Hz to 50 kHz at 8 Ω Damping factor (1 kHz): 250 or more at 8 Ω Frequency response 5 Hz to 100 kHz +0 / −3 dB 20 Hz to 20 kHz +0 / −0.3 dB Input Sensitivity and Impedance (1 kHz, 100 W / 8 Ω) Moving coil (MC) cartridge: 150 μV RMS / 50 Ω Moving magnet (MM) cartridge: 3.5 mV RMS / 47 kΩ CD player (or similar source): 200 mV RMS / 47 kΩ Main input: 1 V RMS / 47 kΩ Maximum Input Voltage (1 kHz, THD 0.5%) Moving coil (MC) cartridge: 2.0 mV RMS Moving magnet (MM) cartridge: 50 mV RMS CD player (or similar source): 2.80 V RMS Nominal Output Voltage and Impedance Line output 2: 200 mV RMS / 1.5 kΩ Preamp output: 1 V RMS / 1.5 kΩ Signal-to-Noise Ratio (JEITA, IHF-A network) Moving coil (MC) cartridge: 90 dB Moving magnet (MM) cartridge: 96 dB CD player (or similar source): 110 dB Tone Controls Bass Boost/cut: 50 Hz / ±9 dB Turnover frequency: 350 Hz Treble Boost/cut: 20 kHz / ±9 dB Turnover frequency: 3.5 kHz Connectivity 1 XLR analog audio input 3 RCA analog audio inputs 1 phono input 1 line output 1 preamp output 1 main input 1 12V trigger input 1 remote control input/output 1 service port 1 IEC power socket Physical Characteristics Power supply: 230 V AC, 50 Hz Power consumption In operation: 350 W In standby: 0.2 W Dimensions (W × H × D): 435 × 157 × 463 mm Weight: 22.7 kg