The all new STIHL MS 362 CM Chainsaw- 37 /40 cms Bar
Buy online - https://monaghanhire.com/collections/stihl-chainsaws/products/stihl-ms-362-cm
📱or call 042-9740875/ 047-74444/ 087-9640875
Finance available, apply directly through our website.
Robust and powerful, everyday forestry chainsaw, designed and built for the professional. Ideal for long sewing sessions harvesting wood. With 2-MIX engine and M-Tronic technology. The electronic self-tuning engine management system means that the fuel supply is electronically controlled and the machine automatically adapts to operating and ambient conditions, ensuring optimal engine performance every time. The memory function remembers previous operating conditions and allows you to restart quickly after an extended break. With an easy clean HD2 filter, controlled delivery oil pump and practical features such as a stainless steel muffler, captive nuts on the sprocket cover and monocoque cover with three quick release fasteners. The 2-MIX technology in the innovative Stihl MS 362 C-M ensures up to 20 percent less fuel consumption and up to 50 percent emissions reduction compared to the same power Stihl two-stroke engines without 2-MIX technology.
The decompression valve is part of the easy starting system. The valve should be pressed before starting to reduce the compression pressure when starting, as well as reducing the effort needed to pull the starter rope. The decompression valve is semi-automatic it must be pressed manually before starting, but then closes automatically
As M-Tronic has electronic cold and warm start recognition, only one start position is needed on the combi-lever. The exact amount of fuel is supplied on demand. You do not need to know about the status of your chainsaw and can apply full throttle straight away - even with a cold start. Because the saw is warmed up by optimum acceleration in a few seconds.
This fully electronic engine management system adjusts ignition timing and fuel metering in all operating modes. It also takes external conditions such as temperature, altitude and fuel quality into account. It ensures consistent engine performance, a constant maximum speed and superb acceleration. M-Tronic makes manual carburettor adjustments unnecessary. Thanks to electronic cold/warm start recognition, now there is only one start position on the combi-lever. The engine starts after fewer pulls and with no change of position, and can immediately accelerate up to speed - even after a cold start. M-Tronic also remembers the settings from the last time the tool was used. So when external conditions are the same, optimal engine performance is available every time you start up again.
Four overflow channels swirl the fuel-air mix before ignition, allowing for optimum combustion and highly efficient performance. The result is lower fuel consumption and high torque across a broad rpm range
The HD2 filter is made from polyethene filter material with up to 70 percent finer pores than fleece and polyamide filters to trap even very fine dust. In addition, it is oil and water-repellent and thus very easy to clean. The PET-covered filter cartridge with quick-release lock enables the filter to be assembled and disassembled in next to no time, without using tools.
Intense vibration at the handles of power tools can lead to long-term effects on blood vessels in the hands and arms. STIHL has therefore developed an effective anti-vibration system whereby the oscillations from the machine's engine are dampened which significantly reduces vibrations at the handles.
Stihl long-life air filtration systems with pre-separation achieve perceptibly longer filter life compared with conventional filter systems. Air drawn in is swirled. The larger, heavier particles are ejected. The pre-cleaned air is routed to the air filter via the pre-separator duct.
This controller in the carburettor prevents the fuel-air mixture getting richer as the air filter becomes clogged. The correct quantity of fuel is delivered to the carburettor depending on the quantity of air passing through the air filter. This keeps the fuel/air ratio in the combustion mixture constant and hence also the engine power. The filter doesn't need to be cleaned until an appreciable drop in power occurs.
When changing the cutting attachment, you will not risk losing the nuts on the sprocket. The MS 261 is the first STIHL chainsaw to be equipped with the captive nuts. A great advantage for all users.
Allows a precise, demand-based delivery of oil. It's possible to reduce oil production by up to 50 percent in the E position. For very long cutting attachments or very dry wood, an additional volume of oil can be added by the user. similar to the illustration
The tensioning screw can be found on the side of the chainsaw through the sprocket cover. This removes the need for contact with the sharp saw chain.
The Ematic chain lubrication system ensures pinpoint lubrication of the saw chain links and guide bar rails. When used with Stihl Oilmatic saw chain, it will provide maximum lubrication, longer wear and less oil consumption than conventional methods of chain lubrication. The Ematic system can reduce bar oil consumption by up to 50 percent
Stihl ElastoStart reduces the shock caused by the compression of the engine during starting. The compression shock is taken away from the user's joints and muscles through a spring or rubber element in the starter handle.
Special catches on the fuel and oil tanks for easy opening and locking without the need for tools.
Power Output: 3.5 kW
Displacement: 59 cm³
Sound Pressure Level: 106 dB(A)
Sound Power Level: 117 dB(A)
Left Vibration Levels: 3.5 m/s²
Right Vibration Levels: 3.5 m/s²
Power to Weight Ratio: 1.6 kg
Maximum Bar Length: 450 mm
Stihl Oilomatic Sawchain Pitch/Type: 3/8" RS
Oil Tank Volume: 325 cm³
Tank Volume: 0.60 litre
Weight: 5.6 kg
Payment & Security