Adhesive for insulation boards 15 kg

The substrate must be load-bearing, hard, dry and clean. Layers that weaken binding, e.g. fats, bitumens, dust, weak or cracked plasters, etc., should be removed. - Unevenness and cavities greater than 10 mm should be repaired with cement mortar. Smaller unevenness can be levelled with MAX glue. - Levelling or repairing the substrate should be done with a sufficient distance (about 1 day / 1 mm layer thickness) before gluing thermal insulation boards. - Substrates with high water absorption (e.g. aerated concrete) should be primed approx. 12-24 hours before the work is done. CHARACTERISTICS: - Mixing ratio, approx. 2.5-3.0 l of water for 15 kg (bucket) of dry mix; - Dry mix consumption, dry insulation, approx. 3-4 kg/m2, uneven surfaces, approx. 4-6 kg/m2 - Mortar use time, up to 2 hours; - Application temperature: from +5°C to +25°C - Buckets 15 kg +/- 200 g. Width(cm) 2 Height(cm) 3 Depth (cm) 4 Weight (kg) 15.3