OBD2 OBD Power Cable for Dash Camera, OBD to Type-

OBD2 OBD Power Cable for Dash Camera, OBD to Type-C USB OBDII Adapter Hardwire Charger Cable 24 Hours Surveillance and Acc Two Mode with Switch Button and Low Voltage Protection, 12-36V to 5V/3A 【Precautionary Note for OBD Power Adapter】- 👉1.Try to avoid places where the vehicle is parked where there is a huge vibration (which may falsely trigger the obd 2 type c power cable). 👉2.The USB Type-C connector of this obd ii power cable uses A5-B5 signal pins and may not be compatible with some dash cam brands use A8-B8 signal pins. 👉3.dash cam power adapter obd suitable for all Type-C port electronic devices generally. (May not work with some phone charging protocol) 【Two Work Modes OBD2 Dash Cam Power Cable】- OBD power cable for dash camera type c with one-button operation. Mode "O" ACC mode - When the car is ignited, power cord begins to output power; After the car is turned off for 20 minutes, OBD power cable will automatically stop supplying power and turn off the output. Mode "-"; Monitor the working mode, with the obd2 dash cam adapter usb c continuously supplying power for 24 hours, and maintain operation until low battery voltage (11.7V) is detected 【Low Voltage Protection OBD2 Power Cable】- OBD2 power adapter for dash cam is equipped with an intelligent program control chip, which automatically detects battery voltage and provides low voltage protection. When the battery voltage drops below 11.7V, the power output is automatically cut off to ensure normal vehicle startup. Don't worry about this obd power adapter for dash cam usb c damaging your car battery 【Somethings Need You to Know】- 1.Before purchasing, please check whether your dashcam adapter cable is the A5-B5 signal pin.If not, OBD Power Cable won’t support your dashcam. 2. In "O" mode, after your car is turned off and powered off, it will take 20 minutes for the product to be powered off. At the same time, you need to leave your car and do not let the car vibrate. Otherwise, the OBD Power Cable will