Vent Axia Sentinel Kinetic FH 408167 (RH) MVHR

Vent Axia Sentinel Kinetic FH 408167 Right Hand Heat Recovery Unit - used in 3 bedroom bungalow for 4 years. - comes as per picture - comes with 2 x new filters installed, and two spares - selling as upgrading to larger unit for an extension. Lo-Carbon Sentinel Kinetic FH Acoustic Enclosure option for reduced breakout noise Acoustic Top Box option for reduced in-duct noise Horizontal duct option for space-saving installations Integrated digital controller for simple and accurate commissioning Plug and play control; Humidistat BMS connectivity LS Input (Light Switch) Self Diagnosis for simplieid fault finding Adjustable delay On/ delay Off timer Product Overview Ventilation Type Mechanical Ventilation Heat Recovery (MVHR) Sector New Build Product Range Lo-Carbon Sentinel Kinetic FH Ducting/Connection Size 125mm IP Rating IP22 Easy Installation The Sentinel Kinetic models can be mounted vertically in a roof space or in an appropriate cupboard within the dwelling. When mounted in an unheated area the ducting and unit must be insulated in accordance with the Domestic Ventilation Compliance Guide. Ducting can be attached to the unit horizontally, vertically or both. For scenarios where noise is a critical issue, an Acoustic Enclosure is available to reduce breakout noise and the Acoustic Top Box will reduce in-duct noise at key frequencies. Left (L) or right (R) hand installation. Left hand and right hand units are available. Spigot Options The combination of spigot options allows installation in confined locations. If vertical and horizontal connection is required on the same outlet/inlet, additional spigots can be supplied. The condensate drain can be taken out through the back, side or bottom of the unit. Using the fittings supplied, the final condensate connection is made outside the unit and can be completed after installation. Integral Humidity Sensor The integral humidity sensor increases speed in proportion to relative humidity levels, saving energy and r