Glue for PVC material ( PVC boats )

The Borika Fasten glue designed for quick and high-quality repair of inflatable boats made from PVC-based materials. Leaves an elastic and water-resistant seam. Can be used for gluing and repairing other PVC products. Application: To increase the heat-resistance and strength of the seam, it is necessary to use a two-component mixture of the glue and DESMODUR RC hardener (mix 1 part hardener with 20 parts of glue ) . Apply a thin layer of glue on a dry surface, that had been cleaned and degreased with alcohol or ethyl acetate before, wait 3–5 minutes. Apply a second layer of glue and wait 5 minutes. (The adhesive film should not stick to your fingers, should not be cloudy or glazed). Heat the both surfaces, that have to be glued together to 60 ° C, carefully place one surface on top of the other and press firmly (roll). The bond acquires sufficient strength after 5 - 15 minutes. Strength of the bond increases over time. Tears and punctures over 5 cm in inflatable balloons must be repaired from the outside and inside. Keep away from fire! Work in a well-ventilated area using protective equipment ( gloves , glasses , mask ... ) ! Set included : 40 ml glue and 2 ml hardener. https://www.youtube.com/watch?v=UxtVcTS9M3Y&feature=emb_title Best price 7 eur Delivery nationwide + 3 eur If interested in fishing , inflatable boats or accessories for inflatable boats , please look at my other ads Thanks