Audio Technica LP3

Turntable In excellent condition, very light use. https://www.whathifi.com/audio-technica/lp3/review Technical Specifications: Turntable: Type: Fully Automatic, Belt-Drive Motor: DC motor Speeds: 33-1/3 RPM, 45 RPM Turntable Platter: Die-cast aluminium Wow and Flutter: Less than 0.2% WRMS (33 1/3 RPM) at3kHz Signal-to-Noise Ratio: > 60 dB Output Level: “PHONO” (MM) 3.5mV nominal at 1kHz, 5cm/sec / “LINE” (MC) 220mV nominal at 1kHz, 5cm/sec Phono Pre-Amp Gain: 36dB nominal, RIAA equalised / 56dB nominal, RIAA equalised Power Supply Requirements: 220 to 240 V / 50, 60 Hz Power Consumption: 2W Dimensions: 435 mm ×353 mm×128 mm (W×D×H) Weight: 5.2kg Accessories Included: Rubber mat, Dust cover, Platter (with drive belt), Counterweight, AT-HS3 Headshell with AT91R VM stereo cartridge, 45 RPM adapter, Power cable Cartridge & Stylus: Model: AT91R Type: VM Dual Magnet Output Voltage: 3.5mV (mV at 1kHz, 5 cm/sec) Vertical Tracking Force Range: 1.5 to 2.5g (standard 2.0g) Stylus Construction: 0.6 mil bonded conical Cantilever: Aluminium pipe Recommended Load Impedance: 47,000 ohms Weight: 5.0g Headshell: Model: AT-HS3 Weight: 11.1g Overhang Adjustment: 8mm Tone Arm: Type: Static balanced straight shaped with soft damping control Effective Length: 221.5mm Overhang: 19mm Maximum Tracking Error Angle: Less than 3° Stylus Pressure Adjustment Range: 1 to 4g Applicable Cartridge Weight: 14.5 to 20g Anti-skating Range: 0 - 3g