The W691 2HP is a more powerful machine that gives a higher flowrate per hour which allows a longer hose length to be attached or a small system of branches and gates to be fitted around the workshop.
The extractor is fitted with two inlets, which can be used simultaneously; for example, to collect from above and below the saw blade on a table saw.
This 1500w model is fitted with a 500mm large collection bag making it suitable for any high volume dust and chip producing machinery.
Supplied with 5 micron filter bag, transparent collection bag, durable steel fan, NVR switch, wheels, quick release metal straps and Y branch.
A 16amp fixed electric supply is required to run this machine.
Hose is not supplied as standard, our 100mm diameter transparent hose is recommended, sold by the metre.
Maximum recommended total hose length is 7 metres.
Maximum running time without rest is 2 hours.
This machine is intended for Light Trade use which means it has a maximum continuous running time of 2 hours, after which the motor must be rested and left to cool. If you need need a longer duty cycle than this please look at our professional heavy duty range of extractors.
Replacement Bags for this Dust Extractor also available.
Supply: 230v (16amp)
Motor: 1500w (2HP)
Flow Rate: 2000m3/hour
Drum Diameter: 500mm (20'')
Inlet Diameter: 125mm (5'')
2 x Intake Holes (100mm) (4'')
5 Micron Filter Bag
Bag Capacity: 148 Litres
Bag Height: 850mm (34'')
Run Time: 2 Hours
12 Months Guarantee!
Visit our Store: