Jansen Wood Chippers

FULL RANGE OF JANSEN WOOD CHIPPERS AVAILABLE ● Petrol engine OR PTO driven. ● Chipping capabilities up to 9 and half inches diameter ●Hydraulic feed system with speed control, reverse function in case of a blockage ●Large funnel openings ●Adjustable ejection chutes ●User friendly with all safety features and covers ●Can be towed ● 2 year parts warranty ● Finance available Jx-72RS is €4270 plus the vat The Jansen JX-72RS is new to our shredder line. Working with this unit is a true delight thanks to its hydraulic feed system. With this model, feeding and pushing etc. are a thing of the past; the 2 feed rollers take care of this themselves. The speed of the feed rollers can be continuously adjusted with the control valve. If the feeder does jam, the feed can be reversed with the large handle on the hopper. Plus, the feed can be switched off with this handle. The unit is powered via the tractor’s hydraulics; a pressurised supply line and an unpressurised return line are required, or alternatively a double-acting control unit and a flow rate of at least 10 L/min. The shredder comes complete with PTO. A shear pin has also been built into one side of the PTO. The hopper can be folded up for transport. You should have an engine power output of at least 55 HP. The PTO must have a speed of 540 rpm. The feed hopper has an opening of 91x70 cm at the top; at the bottom the opening measures 21x29 cm. It can shred fresh wood with a maximum diameter of approx. 16 cm. You can open the flywheel cover completely by unscrewing just one screw, giving you access to the 4 cutting blades, which are double sided. The discharge chute has a height of approx. 217 cm (plus the height of the lower link) and can be rotated 360 degrees. The ejection angle can also easily be changed and can expel chippings up to 10 metres. Video of machine in operation below: https://youtu.be/KafpJgytC6k